Now accepting custom orders — Get your instant quote →
All calculators

XEON NC Press Brake Bend Simulator

Powered by Xeon NC

Export
Draw your profileClick to place the first corner, then each next corner. Type a number while drawing for an exact length, or pick a shape on the left.
Bend 1
Click to place the first corner
Bend 1 / 1 no collisions
// Materials in stock
Pick your metal.
Pick your thickness.

    Free press brake bend simulator

    Sketch a sheet metal profile, pick a stocked gauge, and run every bend in 2D on the TRUMPF punches and dies our shop uses. The simulator picks a collision-free bend order, animates each stroke on a TruBend 5170S cross-section, and checks the part against the punch, ram, die, lower beam and itself. No account, no download.

    1. Build profile. Start from a shape, draw with the line tool, or add flanges one at a time. Choose outside or inside dimensions.
    2. Pick the material. Browse the metals we stock, then the thickness. It loads the shop die, punch, inside radius and K-factor.
    3. Simulate. Step through the sequence, swap tools, and read the Checks panel for any collision.
    4. Export. Download the flat pattern DXF or profile SVG, or copy a share link.

    New to it? Read the step-by-step guide to the bend simulator, or see the K-factor chart and press brake tooling library behind it.

    How to use the bend simulator →